verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-30

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-30 is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 5 to 35 mm on the machine — no shims, no part change.

  • BoreØ16 mm
  • Max stroke35 mm
  • Adjustable range5–35 mm
  • Adjuster threadM5×0.8
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$29.06 $36.56Save 20% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ16 stroke, mounting and version on one page All SDAJ16 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-30

The AirTAC SDAJ16X35-30 is a compact double-acting double-rod cylinder featuring an external extend stop. An M5x0.8 adjuster screw lets you dial the forward end-position on the machine between 5 and 35 mm, eliminating the need for shims or part swaps during changeovers. Retract remains full length.

The short riveted body saves axial mounting depth where round-body units will not fit. End shock is managed by a fixed NBR bumper, not an adjustable air cushion.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-30 Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-30
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ16 mm
Max stroke35 mm
Adjustable range5 – 35 mm
Adjuster thread (R)M5×0.8
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM3×0.5 F / M5×0.8 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø16mm)

PressurePush forcePull force
0.5 MPa86 N86 N
0.7 MPa121 N—
Max (@1.0 MPa)18 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-30

SDAJCompact double-acting cylinder with adjustable stroke.
16Bore size in mm.
×35Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-30 Is Used

precision_manufacturing

Probe Positioning

Dial the extend stop from 5 to 35 mm to find the exact contact depth for electronic test probes without machining new spacers.

view_module

Light Clamping

Apply a safe 60 N clamping force on delicate PCBs, using the mechanical stop to prevent over-travel during fixture setup.

handyman

Prototype Stops

Iterate quickly on prototype assembly lines by turning the M5x0.8 screw to test different pusher distances before finalizing the design.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-30 the Right Cylinder?

Choose this model if your fixture requires on-site stroke tuning. It features a 35 mm maximum stroke, a 30 mm adjustment window, an M5x0.8 port, and a female M3x0.5 rod-end thread. Note that a plain cylinder drifts on air loss; for load holding without live pressure, install an external rod lock or pilot-operated check valve. This SKU lacks a magnet, so it cannot take a switch unless you specify the -S variant.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 5–35 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M5×0.8 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-30 FAQ

Turning the R (M5x0.8) screw mechanically shortens the extend stroke by up to 30 mm, giving a usable range of 5 to 35 mm. It sets the stop position only and does not alter force or lock mid-stroke.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X35-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ16X35-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.