
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-10 is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 30 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X40-10 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the M5x0.8 adjuster screw lets you dial the outward stroke down from the 40mm maximum to 30mm directly on the machine, eliminating the need for shims or part swaps during fine-tuning.
Its short riveted body drastically saves axial mounting depth where round-body or profile cylinders will not fit. The bore is hard-anodized and uses a fixed NBR bumper at each end to decelerate the stroke end; this is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot accommodate reed or electronic switches without switching to the -S variant.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 40 mm |
| Adjustable range | 30 – 40 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the mechanical stop on-site to shift a lightweight 5.1kg routing flap for different product sizes running on the same line.
Leverage the short riveted body to fit a tight 16mm bore tooling axis, using the 10mm window to tune carton flap folding depth.
Choose this model when your assembly requires frequent on-machine stroke tuning between 30mm and 40mm.
Confirm the required bore, 40mm maximum stroke, 10mm adjust window, and M5x0.8 air port. This SKU uses a female M3x0.5 rod-end thread and has no magnet. Remember that a plain cylinder does not hold its load on air loss or when the valve is centred—the piston drifts and the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 21kgf at 1.0MPa. Adjusting the stroke does not alter these figures.
The R (M5x0.8) screw shortens the extend stop by up to 10mm, giving a usable 30-40mm outward range while retract remains full. It is a mechanical stop, not a mid-stroke lock; the cylinder cannot hold a load if air is lost. For secure holding, use an external rod lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.