
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-10S is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 30 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X40-10S is a compact double-acting double-rod cylinder featuring an external extend stop. An M5x0.8 adjuster screw lets you dial the extend end-position anywhere between 30 and 40 mm directly on the machine, avoiding part swaps.
Its short riveted body minimizes axial mounting depth where round-body or profile units will not fit. The integrated piston magnet supports AirTAC reed or electronic switches for position sensing, while a fixed NBR bumper decelerates the stroke ends. Note that this bumper is not an adjustable air cushion, and the cylinder will not hold a load without live air pressure.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 40 mm |
| Adjustable range | 30 – 40 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the M5x0.8 screw to find the exact 30 to 40 mm extend point for a 100.5 N probe contact during initial fixture setup.
Quickly shorten the extend stop by up to 10 mm when switching product families, avoiding shim adjustments on the 6 mm rod.
Secure delicate cartons using the 86.4 N pull at 0.5 MPa, tweaking the mechanical stop to prevent crushing on the fly.
When sizing this 16 mm bore, evaluate your force needs bidirectionally.
Choose this specific model if your fixture requires frequent on-site stroke tuning across a 30 to 40 mm window. It includes the -S magnet for switch sensing and a female M3x0.5 rod-end thread on a 6 mm rod. Remember that a plain cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end and the R screw is a mechanical stop, not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 21 kgf at 1.0 MPa, with an operating pressure range of 0.15 to 1.0 MPa.
The R (M5x0.8) screw shortens the extend stop by up to 10 mm, giving a usable 30 to 40 mm range without changing force. The included -S magnet works with AirTAC reed or electronic switches mounted in the body grooves for position detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.