
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-20 is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 20 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X40-20 is a compact double-acting cylinder featuring an on-site extend stop. An external M5x0.8 adjuster screw lets you dial the outward stroke anywhere between 20 and 40 mm, eliminating the need for shims or part swaps during machine commissioning.
The short riveted body drastically cuts axial mounting depth where round-body alternatives will not fit. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. This specific SKU ships without a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 40 mm |
| Adjustable range | 20 – 40 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 20 to 40 mm to test multiple sensor touchpoints on a small testing fixture without machining new spacers.
Fine-tune the clamping depth precisely during trial runs, relying on the fixed NBR bumper to absorb the end shock in compact setups.
Choose this model if your fixture requires frequent on-machine stroke tuning between 20 and 40 mm.
Confirm the bore, 40 mm maximum stroke, 20 mm adjustment window, and M5x0.8 air port. This base configuration lacks the -S magnet and uses a female M3x0.5 rod-end thread. Note that a plain cylinder drifts when air is lost or the valve centres; the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
Turning the external M5x0.8 screw shortens the extend stroke by up to 20 mm, allowing the rod to stop anywhere between 20 and 40 mm. The retract stroke remains full, and the adjuster sets the stop without altering force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.