verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-40B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-40B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 0 to 40 mm on the machine — no shims, no part change.

  • BoreØ16 mm
  • Max stroke40 mm
  • Adjustable range0–40 mm
  • Adjuster threadM5×0.8
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$30.00 $37.50Save 20% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ16 stroke, mounting and version on one page All SDAJ16 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-40B

The AirTAC SDAJ16X40-40B is a compact double-acting double-rod cylinder featuring an on-site extend stop. An external M5x0.8 adjuster screw lets you dial the forward end-position anywhere from 0 to 40 mm without swapping shims or parts, while the retract stroke remains full length.

Built with a short riveted body, this unit saves axial mounting depth where round-body or profile cylinders cannot fit. It uses a fixed NBR bumper at each end to decelerate the stroke, which is not an adjustable air cushion. This specific SKU includes a male M5x0.8 piston rod thread and lacks a piston magnet, meaning it cannot accept reed or electronic switches without changing to an -S variant.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-40B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-40B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ16 mm
Max stroke40 mm
Adjustable range0 – 40 mm
Adjuster thread (R)M5×0.8
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM3×0.5 F / M5×0.8 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø16mm)

PressurePush forcePull force
0.5 MPa86 N86 N
0.7 MPa121 N—
Max (@1.0 MPa)18 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-40B

SDAJCompact double-acting cylinder with adjustable stroke.
16Bore size in mm.
×40Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-40B Is Used

packaging

Carton Flap Folding

Fine-tune the male M5x0.8 rod extension on the fly during carton size changeovers, saving axial depth in tight packaging machinery.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-40B the Right Cylinder?

When sizing this 16 mm bore, evaluate both neighbours: stepping down to SDAJ12 drops the 0.5 MPa push to 56.5 N, while moving up to SDAJ20 raises it to 157.1 N.

This model suits operators needing frequent on-machine stroke tuning for trial positioning or rapid changeovers. Confirm your bore, 40 mm maximum stroke, 40 mm adjust window, M5x0.8 air port, and male M5x0.8 rod thread. Note that a plain cylinder does not hold a load on air loss or valve centring; the bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 0–40 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M5×0.8 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-40B FAQ

The theoretical maximum push is 21 kgf at 1.0 MPa.

Turning the R (M5x0.8) screw shortens the extend end-position by up to 40 mm, giving a usable forward range of 0 to 40 mm. The screw acts strictly as a mechanical stop and does not alter the output force.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X40-40B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ16X40-40B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.