verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-20B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-20B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 25 to 45 mm on the machine — no shims, no part change.

  • BoreØ16 mm
  • Max stroke45 mm
  • Adjustable range25–45 mm
  • Adjuster threadM5×0.8
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$30.93 $38.43Save 19% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ16 stroke, mounting and version on one page All SDAJ16 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-20B

The AirTAC SDAJ16X45-20B is a compact double-acting double-rod cylinder built for tight axial spaces, featuring a short riveted body that saves mounting depth where larger profile or round-body units fail to fit. It uses an external M5x0.8 R-thread screw to dial the extend stop directly on your machine, yielding a usable extend range of 25 to 45 mm without shims or part swaps.

This specific SKU includes the -B option, meaning it has a male M5x0.8 piston rod thread instead of the default female M3x0.5. It carries no piston magnet (-S omitted), so it cannot host reed or electronic switches. End-of-stroke deceleration is handled strictly by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-20B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-20B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ16 mm
Max stroke45 mm
Adjustable range25 – 45 mm
Adjuster thread (R)M5×0.8
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM3×0.5 F / M5×0.8 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø16mm)

PressurePush forcePull force
0.5 MPa86 N86 N
0.7 MPa121 N—
Max (@1.0 MPa)18 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-20B

SDAJCompact double-acting cylinder with adjustable stroke.
16Bore size in mm.
×45Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-20B Is Used

precision_manufacturing

Probe Contact Tuning

Dial the extend stop from 25 to 45 mm to set exact downward travel on electrical test probes, preventing overtravel damage during fixture changeovers.

view_module

Light Clamping Fixture

Fine-tune the clamping depth against delicate components, relying on the fixed NBR bumper to absorb the end shock without crushing the part.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-20B the Right Cylinder?

Choose this model when your fixture requires on-site stroke tuning to hit a precise target between 25 and 45 mm.

Confirm your parameters: 16 mm bore, 45 mm max stroke, 20 mm adjust window, M5x0.8 air port, male M5x0.8 rod thread, and no magnet. Remember that a plain cylinder does not hold its load if air pressure drops or the valve centres—the piston will drift, and the fixed bumper only decelerates near the end of travel. For suspended or gravity-loaded applications, integrate an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 25–45 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M5×0.8 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-20B FAQ

The theoretical maximum push is 21 kgf at 1.0 MPa.

Turning the M5x0.8 R-thread screw shortens the extend stroke by up to 20 mm, allowing you to set the stop anywhere between 25 and 45 mm. This screw is a mechanical stop, not a mid-stroke lock; the cylinder cannot hold a load without live air pressure and will drift if air is lost.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X45-20B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ16X45-20B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.