
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X5-10 is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 0 to 5 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X5-10 is a compact double-acting double-rod cylinder featuring an external M5x0.8 adjuster screw that dials the extend stop from 0 to 5 mm directly on your machine.
Its short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. End-of-travel deceleration relies on a fixed NBR bumper, which is not an adjustable air cushion, and this specific SKU lacks a piston magnet so it cannot support sensing switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X5-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 5 mm |
| Adjustable range | 0 – 5 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×5 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 0-5 mm extend stop during initial tooling setup to achieve the exact clamping force without machining custom spacers.
The short riveted body fits into multi-axis stations where axial depth is restricted, allowing fine-tuning of the end position on-site.
Choose this unit for setup-heavy stations requiring on-site stroke tuning via the R screw. Confirm your parameters: 16 mm bore, 5 mm stroke, 10 mm window, M5x0.8 port, female M3x0.5 rod thread, and no magnet. Remember that a plain cylinder drifts on air loss; the fixed bumper only decelerates near the end and does not lock the load, so add an external rod lock or pilot-operated check valve for holding.
Quick checklist
It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
The M5x0.8 adjuster screw shortens the extend stop by up to 10 mm, giving a usable extend range of 0-5 mm. The screw is a mechanical stop, not a mid-stroke lock; the cylinder will drift if air is lost, so use an external rod lock for load holding. This SKU has no magnet, so it cannot take sensing switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.