verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-10B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-10B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 40 to 50 mm on the machine — no shims, no part change.

  • BoreØ16 mm
  • Max stroke50 mm
  • Adjustable range40–50 mm
  • Adjuster threadM5×0.8
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$32.53 $40.03Save 18% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ16 stroke, mounting and version on one page All SDAJ16 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-10B

The AirTAC SDAJ16X50-10B is a compact double-acting double-rod cylinder featuring an external M5x0.8 adjuster screw that dials the extend stop from 40 to 50 mm directly on your machine. This SKU uses a male M5x0.8 piston rod thread instead of the default female M3x0.5.

Its short riveted body drastically reduces axial mounting depth compared to round-body alternatives, fitting easily into cramped machinery. End shock is managed by a fixed NBR bumper that decelerates the piston near the stroke ends; it is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S variant.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-10B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-10B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ16 mm
Max stroke50 mm
Adjustable range40 – 50 mm
Adjuster thread (R)M5×0.8
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM3×0.5 F / M5×0.8 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø16mm)

PressurePush forcePull force
0.5 MPa86 N86 N
0.7 MPa121 N—
Max (@1.0 MPa)18 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-10B

SDAJCompact double-acting cylinder with adjustable stroke.
16Bore size in mm.
×50Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-10B Is Used

precision_manufacturing

Tooling Clearance Setup

Dial in the 40-50 mm extend stop on machining fixtures to establish exact tooling clearance without fabricating custom shims.

science

Lab Test Positioning

Adjust the mechanical stop precisely for repetitive test probes in compact laboratory rigs where axial mounting depth is severely restricted.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-10B the Right Cylinder?

When sizing this 16 mm bore actuator, evaluate your force requirements against its neighbours.

Choose this unit if your assembly process requires frequent on-machine stroke tuning across a 10 mm window without changing parts. Remember that a plain cylinder does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end, so integrate an external rod lock or pilot-operated check valve for load holding. Confirm your bore, 50 mm maximum stroke, 10 mm window, M5x0.8 port, male M5x0.8 rod thread, and lack of magnet before ordering.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 40–50 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M5×0.8 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-10B FAQ

The M5x0.8 R screw mechanically shortens the extend stroke from the 50 mm maximum down to 40 mm without changing the force. The screw is a stop, not a lock; the cylinder cannot hold a load on air loss and requires an external rod lock for holding.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X50-10B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ16X50-10B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.