verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-10S

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-10S is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 50 to 60 mm on the machine — no shims, no part change.

  • BoreØ16 mm
  • Max stroke60 mm
  • Adjustable range50–60 mm
  • Adjuster threadM5×0.8
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$44.16 $51.66Save 14% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ16 stroke, mounting and version on one page All SDAJ16 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-10S

The AirTAC SDAJ16X60-10S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. A front M5x0.8 adjuster screw lets you trim the outward stroke on-site across a 50 to 60 mm window, removing the need for shims or part swaps during machine commissioning.

Built with a short riveted body, this unit saves axial mounting depth where round-body or larger profile cylinders cannot fit. End-of-travel deceleration is handled by a fixed NBR bumper, which is not an adjustable air cushion. The -S suffix denotes a built-in piston magnet, enabling position sensing when paired with AirTAC reed or electronic switches along the body grooves.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-10S Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-10S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ16 mm
Max stroke60 mm
Adjustable range50 – 60 mm
Adjuster thread (R)M5×0.8
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM3×0.5 F / M5×0.8 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø16mm)

PressurePush forcePull force
0.5 MPa86 N86 N
0.7 MPa121 N—
Max (@1.0 MPa)18 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-10S

SDAJCompact double-acting cylinder with adjustable stroke.
16Bore size in mm.
×60Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-10S Is Used

conveyor_belt

Changeover Sorting Gates

Rapidly adjust the outward stroke on packaging conveyors for different carton sizes, leveraging the short riveted body to fit within tight transfer clearances.

science

Lab Automation Stops

Set precise mechanical endpoints for sample handling, using the built-in magnet to trigger reed or electronic switches at the exact 60 mm maximum extension.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-10S the Right Cylinder?

When sizing this 16 mm bore actuator, evaluate your force requirements bidirectionally. Choose this specific model if your fixture requires on-site extend tuning within the 50 to 60 mm range.

Confirm the bore, 60 mm maximum stroke, 10 mm adjustment window, and M5x0.8 air port suit your manifold. This configuration includes the -S magnet for electronic or reed sensing and a female M3x0.5 rod-end thread. Remember that the fixed NBR bumper only decelerates the stroke end; a plain cylinder does not hold a load on air loss or valve centering. For suspended loads without live pressure, specify an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ16 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj16-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 50–60 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M5×0.8 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-10S FAQ

It operates between 0.15 and 1.0 MPa, runs at 30-500 mm/s, and functions in -20 to +70 C temperatures.

The external R (M5x0.8) screw shortens the extend stop by up to 10 mm, allowing the outward stroke to be dialed between 50 and 60 mm without changing parts; retract remains full. The -S suffix indicates a built-in piston magnet for use with AirTAC reed or electronic switches, and the screw sets the stop position without altering force.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-10S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ16X60-10S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.