verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-20S

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-20S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 80 to 100 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke100 mm
  • Adjustable range80–100 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$57.91 $65.41Save 11% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-20S

The AirTAC SDAJ20X100-20S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the M6x1.0 adjuster screw lets you dial the forward end-position anywhere between 80 and 100 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.

Its short riveted body drastically reduces axial mounting depth, fitting into tight spaces where larger profile cylinders cannot. The unit includes a built-in piston magnet for AirTAC reed or electronic switches, while a fixed NBR bumper at each end handles end-of-stroke deceleration. This bumper is not an adjustable air cushion, so for high-energy cycles you should slow the approach or add an external shock absorber.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-20S Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-20S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke100 mm
Adjustable range80 – 100 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-20S

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×100Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-20S Is Used

packaging

Variable Depth Tucking

Adjust the mechanical stop on the fly for different carton depths, using the M6x1.0 screw to fine-tune the stroke while the fixed NBR bumper absorbs the end shock.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-20S the Right Cylinder?

When sizing this 20 mm bore actuator, evaluate your force requirements bidirectionally.

This model is ideal for setups requiring frequent on-site stroke tuning across its 80-100 mm window. Confirm your required bore, 100 mm maximum stroke, 20 mm adjustment range, M5x0.8 port, and the integrated magnet for switch sensing. Note that a plain cylinder does not hold position if air pressure is lost or the valve is centered; for load holding without live pressure, install an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 80–100 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-20S FAQ

The M6x1.0 adjuster screw shortens the extend stroke by up to 20 mm, giving a usable forward range of 80-100 mm without altering the force. The included -S magnet works with AirTAC reed or electronic switches for position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X100-20S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X100-20S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.