
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X120-40S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 80 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X120-40S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M6x1.0) screw, you can dial the forward end-position anywhere between 80 and 120 mm directly on the machine, avoiding shims or part swaps.
This variant includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and uses a fixed NBR bumper at each end to decelerate the stroke. The short riveted body saves axial mounting depth where round-body or profile cylinders will not fit. Note that a 120 mm stroke exceeds the 100 mm maximum standard for a 20 mm bore, making this a made-to-order non-standard item.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X120-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 120 mm |
| Adjustable range | 80 – 120 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Ideal for prototype assembly stations where the 80-120 mm extend position must be fine-tuned per part iteration without machining new spacers.
Suits packaging lines requiring rapid format changeover, using the M6x1.0 adjuster to shift a diverting stroke for varying carton depths on the fly.
Useful for vertical lift rigs handling up to 8 kg, allowing operators to set the exact raise height safely before locking down the sequence.
Choose this specific configuration if your fixture requires on-site stroke tuning across an 80 to 120 mm window. Confirm the bore (20 mm), stroke (120 mm), adjustment window (40 mm), M5x0.8 port, and female M4x0.7 rod-end thread suit your mounting. Remember that a plain cylinder does not hold its load on air loss or when the valve is centred—the piston drifts and the fixed bumper only decelerates near the end. For a held load, specify an external rod lock or a pilot-operated check valve.
Quick checklist
The R (M6x1.0) screw mechanically shortens the extend stop by up to 40 mm, yielding an 80-120 mm usable range without changing the output force. The -S suffix denotes a built-in piston magnet compatible with AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.