
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X130-50B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 80 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X130-50B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M6x1.0) adjuster screw, you can dial the forward stroke down by up to 50 mm, yielding a usable extend range of 80 to 130 mm directly on the machine without changing parts.
This specific configuration uses a 130 mm stroke, which exceeds the 100 mm standard maximum for a 20 mm bore, making it a non-standard made-to-order item. It features a male-threaded M6x1.0 piston rod and a short riveted body that minimizes axial mounting depth. End shock is managed solely by a fixed NBR bumper, which decelerates the piston near the end of travel but is not an adjustable air cushion. Note that this SKU lacks a piston magnet and cannot support sensing.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X130-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 130 mm |
| Adjustable range | 80 – 130 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 80 to 130 mm extend point during prototype runs. The external R screw allows instant repositioning without disassembling the fixture.
The fixed NBR bumper absorbs the end shock as the male M6 rod contacts the workpiece.
When sizing this actuator, evaluate your force requirements both ways.
Choose this model if your application requires frequent on-site stroke tuning between 80 and 130 mm during setup or changeovers. Confirm your porting matches the bore-fixed M5x0.8 air connection and that the male M6x1.0 rod end suits your mounting interface. Remember that a plain cylinder does not hold its load upon air loss or valve centering; the piston will drift. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
Turning the M6x1.0 adjuster screw shortens the extend stop from the 130 mm maximum down to 80 mm, without altering the force. This specific SKU lacks a piston magnet, so it cannot take a switch; you would need the -S variant for reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.