
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X15-10 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 5 to 15 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X15-10 is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjustment screw. This mechanism lets you dial the extend stop down to any position between 5 and 15 mm directly on the machine, eliminating the need for shims or part swaps during commissioning.
The short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Please note this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X15-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 15 mm |
| Adjustable range | 5 – 15 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×15 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 5 to 15 mm extend stop during prototype tooling setup, allowing precise 94 N contact without swapping physical spacers.
Stepping down to the SDAJ16 yields 100.5 N, whereas moving up to the SDAJ25 provides 245.4 N. This model is ideal for operators needing on-site stroke tuning during frequent changeovers. Confirm your requirements for the 20 mm bore, 15 mm maximum stroke, 10 mm adjust window, M5x0.8 port, female M4x0.7 rod thread, and the absence of a magnet.
Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centered. The piston will drift, as the fixed NBR bumper only decelerates near the end of travel and the R screw acts as a mechanical stop, not a lock. For load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj20-adjustable-cylinder
Quick checklist
It operates at speeds of 30-500 mm/s within a pressure range of 0.15-1.0 MPa.
Turning the M6x1.0 R screw shortens the extend stroke by up to 10 mm, giving a usable extend range of 5 to 15 mm without changing parts. This specific SKU has no piston magnet and cannot take a switch; you must select the -S option to use AirTAC reed or electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.