
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X20-20S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 0 to 20 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X20-20S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the M6x1.0 adjuster screw lets you dial the extend position from 0 to 20 mm directly on your machine, eliminating the need for shims or part swaps.
This unit includes a built-in piston magnet (-S) for compatibility with AirTAC reed or electronic switches. Its short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. The piston rod measures 8 mm, and the air port is an M5x0.8 thread.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X20-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 20 mm |
| Adjustable range | 0 – 20 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×20 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the exact extend contact depth for delicate test probes on a circuit board fixture, utilizing the 0-20 mm tuning range to prevent overshoot.
Adjust the push length on the fly for carton closing arms during format changeovers, accommodating varying box heights without swapping hardware.
Set precise fluid dispense nozzle heights using the M6x1.0 stop screw, ensuring consistent volumes across different container geometries.
When sizing this 20 mm bore actuator, evaluate your force requirements both ways. Choose this specific model if your fixture requires frequent on-site stroke tuning or trial positioning within its 0 to 20 mm extend window.
Confirm your parameters: 20 mm bore, 20 mm maximum stroke, 20 mm adjustment window, M5x0.8 port, female M4x0.7 rod-end thread, and the -S magnet option. Note that a plain pneumatic cylinder does not hold a load if air pressure drops or the valve is centered; the piston will drift. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push force is 32 kgf at 1.0 MPa.
The external M6x1.0 screw shortens the extend stop by up to 20 mm, giving a usable extend range of 0 to 20 mm; retract remains full stroke. The included -S magnet allows tracking via AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.