
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X25-10 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 15 to 25 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X25-10 is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjuster screw that dials the extend stop directly on your machine. You can tune the forward stroke anywhere between 15 and 25 mm without swapping shims or parts, while retract remains full length.
Built with a short riveted body, this unit saves valuable axial mounting depth where larger profile or round-body cylinders cannot fit. End-of-stroke deceleration relies on a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches; choose the -S variant if you require position sensing.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X25-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 25 mm |
| Adjustable range | 15 – 25 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×25 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly re-tune the stroke length for different product sizes on a packaging line, using the short riveted body to fit tight transfer gaps.
Choose this model for setup-heavy lines requiring frequent on-machine stroke tuning between 15 and 25 mm.
Confirm the 20 mm bore, 25 mm maximum stroke, 10 mm adjust window, and M5x0.8 port. Because this SKU has no magnet, sensing is impossible without switching to an -S version. Remember that the fixed NBR bumper only decelerates the stroke end; a plain cylinder does not hold a load on air loss or valve centering. For suspended loads, integrate an external rod lock or pilot-operated check valve, as the M6 adjuster is a mechanical stop, not a mid-stroke lock.
Quick checklist
Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed ranges from 30-500 mm/s.
The M6x1.0 adjuster screw mechanically shortens the extend stop by up to 10 mm, giving a usable forward range of 15-25 mm; it does not alter force. This specific SKU has no piston magnet, so it cannot accept reed or electronic switches—you must select the -S option for sensing capabilities.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.