
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X35-30SB is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 5 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X35-30SB is a compact double-acting double-rod cylinder built for tight axial spaces, featuring a short riveted body that saves mounting depth where larger profile housings fail to fit. An external M6x1.0 adjuster screw lets you dial the extend stop directly on the machine between 5 and 35 mm, eliminating the need for shims or part swaps during changeovers.
This specific configuration includes a male M6x1.0 piston rod and a built-in magnet for AirTAC reed or electronic switches. End shock is managed solely by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X35-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 35 mm |
| Adjustable range | 5 – 35 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the male M6x1.0 rod extension on the fly to accommodate varying package sizes on a conveyor line without swapping out the entire cylinder body.
Leverage the built-in magnet with an electronic switch to verify the 8 kg vertical lift position, tuning the bumper-limited stroke end to prevent gripper crashes.
Choose this model if your fixture requires frequent on-site stroke tuning to hit exact endpoints.
Confirm the bore (20 mm), maximum stroke (35 mm), adjustment window (30 mm), and M5x0.8 air port match your pneumatic layout. This variant includes the -S magnet for position sensing and the -B male M6x1.0 rod thread. Note that a plain cylinder does not hold its load if air pressure drops or the valve centres; the piston will drift. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The adjustment screw does not alter these force values.
Turning the external R (M6x1.0) screw shortens the extend stroke by up to 30 mm, allowing you to set the endpoint anywhere between 5 and 35 mm. The included -S magnet enables position feedback using AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.