
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X40-10SB is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 30 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X40-10SB is a compact double-acting double-rod cylinder built for tight spaces, featuring a short riveted body that saves axial mounting depth where round-body alternatives will not fit. An external M6x1.0 adjuster screw lets you dial the extend stop down from the 40 mm maximum to 30 mm directly on the machine, eliminating shims or part swaps during changeovers.
This unit includes a built-in piston magnet for AirTAC reed or electronic switches and a male M6x1.0 threaded rod end. End shock is absorbed by a fixed NBR bumper, which decelerates the stroke but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X40-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 40 mm |
| Adjustable range | 30 – 40 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the extend stop from 30 to 40 mm via the M6x1.0 screw during prototype runs to find the exact contact point for delicate 8 kg test fixtures.
Fit the short riveted body into dense tooling grids to eject parts, using the male M6 rod and reed or electronic switches for tight timing control.
Choose it when you need on-site stroke tuning between 30 and 40 mm.
Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end of travel and the screw is a mechanical stop, not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve. This configuration specifies a 20 mm bore, 40 mm stroke, 10 mm window, M5x0.8 port, an -S magnet, and a -B male M6x1.0 rod thread.
Quick checklist
The R M6x1.0 screw shortens the extend end position from 40 mm down to 30 mm without changing the force. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.