verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-20B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-20B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 25 to 45 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke45 mm
  • Adjustable range25–45 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$32.07 $39.57Save 18% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-20B

The AirTAC SDAJ20X45-20B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M6x1.0) screw, you can dial the forward stroke on-site anywhere between 25 and 45 mm without changing parts.

This variant features a male-thread M6x1.0 piston rod for direct mounting. The short riveted body saves valuable axial depth where larger profile cylinders cannot fit. End-of-travel shock is handled by a fixed NBR bumper that decelerates the piston, rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S option.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-20B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-20B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke45 mm
Adjustable range25 – 45 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-20B

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×45Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-20B Is Used

conveyor_belt

Package Diverters

Fine-tune the pusher stroke on the fly for varying carton widths, ensuring the male M6 rod retracts fully to clear passing items.

engineering

Compact Assembly Stations

Fit the short riveted body into tight axial spaces to press small bearings, adjusting the stop depth precisely as tooling wears.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-20B the Right Cylinder?

Stepping down to the SDAJ16 yields 100.5 N, while stepping up to the SDAJ25 provides 245.4 N.

Choose this 20mm bore if your fixture requires on-site stroke tuning during frequent changeovers. It uses an M5x0.8 port and a male M6x1.0 rod thread. Remember that the fixed bumper only decelerates the end motion; a plain cylinder drifts when air is lost or a valve centers. For suspended loads, integrate an external rod lock or pilot-operated check valve, as the adjuster screw is a stop, not a locking brake.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 25–45 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-20B FAQ

The theoretical maximum force is 32 kgf at 1.0 MPa. It operates at 30-500 mm/s within a pressure range of 0.15-1.0 MPa.

The M6x1.0 adjuster screw mechanically shortens the extend stroke by up to 20 mm, allowing a usable range of 25-45 mm. This SKU has no piston magnet, so it cannot accept switches; you must select the -S variant to use reed or electronic sensors.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-20B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X45-20B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.