
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-30S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 15 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X45-30S is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjuster screw that lets you dial the extend stop anywhere between 15 and 45 mm directly on the machine. Retract travel stays at the full 45 mm.
Its short riveted body drastically cuts axial mounting depth where a larger profile or round-body unit will not fit. End shock is handled by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion. The included -S piston magnet supports position sensing using AirTAC reed or electronic switches fitted into the body grooves.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 45 mm |
| Adjustable range | 15 – 45 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Turn the M6x1.0 adjuster to shift the rod end quickly when switching product families, avoiding teardown of the entire 20 mm bore assembly.
Choose this specific unit if your fixture requires frequent on-machine stroke tuning without part changes.
Confirm the bore (20 mm), maximum stroke (45 mm), adjustment window (30 mm), and M5x0.8 port. This variant includes the -S magnet for electronic or reed sensing and uses a female M4x0.7 rod-end thread. Remember that a plain cylinder does not hold a load on air loss or valve centring; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa.
The external M6x1.0 screw shortens the extend stroke by up to 30 mm, allowing usable end positions from 15 to 45 mm without changing parts. The -S option adds a built-in piston magnet for AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.