
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-40 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 5 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X45-40 is a compact double-acting double-rod cylinder featuring an external extend stop. An M6x1.0 adjuster screw lets you dial the forward end-position anywhere between 5 and 45 mm directly on the machine, eliminating the need for shims or part swaps during setup. Retract remains at the full stroke length.
The short riveted body saves valuable axial mounting depth where larger profile cylinders will not fit. End shock is managed solely by a fixed NBR bumper, which decelerates the stroke but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 45 mm |
| Adjustable range | 5 – 45 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the M6 screw to find the exact 5 to 45 mm extension for prototype gauging, locking the stop once the optimal contact depth is proven.
Swap product families on a packaging line and rapidly readjust the forward stop without disassembling the cylinder or adding mechanical shims.
Choose this specific model if your fixture requires frequent on-site stroke tuning to accommodate varying part heights.
Confirm the specifications: 20 mm bore, 45 mm maximum stroke with a 40 mm adjustment window, M5x0.8 port, and a female M4x0.7 rod-end thread. This SKU lacks the -S magnet and cannot accept reed or electronic switches. Note that a plain cylinder does not hold its load on air loss or valve centring; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
This 20 mm bore cylinder uses an M5x0.8 port.
Turning the R (M6x1.0) screw shortens the extend stroke by up to 40 mm, yielding a usable 5 to 45 mm range. The screw is a mechanical stop, not a mid-stroke lock; the cylinder cannot hold a load if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.