verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-30

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-30 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 25 to 55 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke55 mm
  • Adjustable range25–55 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$33.93 $41.43Save 18% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-30

The AirTAC SDAJ20X55-30 is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. A built-in M6x1.0 adjuster screw lets you dial the outward stroke anywhere between 25 and 55 mm without changing parts.

Its short riveted body significantly reduces axial mounting depth, fitting easily where standard round-body or profile cylinders cannot. End-of-travel shock is handled by a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support position sensing without upgrading to the -S variant.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-30 Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-30
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke55 mm
Adjustable range25 – 55 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-30

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×55Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-30 Is Used

precision_manufacturing

Tooling Changeover

Dial in the exact extend stop from 25 to 55 mm on the machine to accommodate different part heights without machining new spacers.

straighten

Trial Positioning

Use the M6x1.0 adjuster screw to find the optimal extension endpoint for a new assembly jig before locking it down.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-30 the Right Cylinder?

When sizing this 20 mm bore actuator, evaluate your force needs carefully. Choose this model if your fixture requires exact outward positioning between 25 and 55 mm during initial commissioning or tooling changeovers.

Verify your system parameters: the nominal stroke is 55 mm with a 30 mm adjustment window, the air port is M5x0.8, and the rod end features a female M4x0.7 thread. Keep in mind that a plain cylinder does not hold position if air pressure drops or the valve centers; the piston will drift. For load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 25–55 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-30 FAQ

The theoretical maximum push force is 32 kgf at 1.0 MPa.

Turning the external R (M6x1.0) screw mechanically shortens the extend stroke by up to 30 mm, giving a usable range of 25 to 55 mm. It sets the end stop only and does not alter the output force or lock the piston mid-stroke.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X55-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.