
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-10B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 50 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X60-10B is a compact double-acting double-rod cylinder featuring an external extend stop. An M6x1.0 adjuster screw lets you dial the forward end-position between 50 and 60 mm directly on your equipment, eliminating the need for shims or part swaps.
Built with a short riveted body, this unit saves valuable axial mounting depth where larger profile cylinders cannot fit. It features a male M6x1.0 threaded piston rod and a fixed NBR bumper at each end to absorb end-of-stroke shock. This specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 60 mm |
| Adjustable range | 50 – 60 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 50 to 60 mm extend stop during initial tooling commissioning to achieve precise 94 N clamping without swapping mechanical spacers.
Adjust the end-position by up to 10 mm on-site to set accurate metal bending depths for small brackets requiring repeatable physical stops.
When sizing this 20 mm bore actuator, evaluate your force requirements both ways. Choose this model if your fixture requires on-site extend tuning between 50 and 60 mm.
Confirm your parameters: 20 mm bore, 60 mm maximum stroke, 10 mm adjustment window, M5x0.8 port, and a male M6x1.0 rod thread. Note that a plain SDAJ does not hold a load when air pressure is lost or the valve is centered; the piston will drift. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa.
Turning the R (M6x1.0) screw shortens the extend stroke by up to 10 mm, yielding a usable range of 50 to 60 mm. This SKU has no piston magnet and cannot accept switches; selecting the -S option adds a magnet for reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.