
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-30 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 30 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X60-30 is a double-acting compact cylinder featuring an external M6x1.0 adjuster screw that dials the extend stop anywhere between 30 and 60 mm directly on your machine.
Its short riveted body drastically reduces axial mounting depth where a larger profile cylinder cannot fit. End-of-travel deceleration relies on a fixed NBR bumper rather than an adjustable air cushion, and this specific SKU lacks a piston magnet, meaning it cannot host reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 60 mm |
| Adjustable range | 30 – 60 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the M6 stop screw to set precise 30 to 60 mm probe extension on a coordinate measuring rig, ensuring the 8 kg safe vertical lift capacity handles the sensor payload securely.
Rapidly reconfigure extend distances during product changeovers without swapping shims, using the 30 mm adjustment window to fine-tune tooling approach.
When sizing this unit, verify if the 20 mm bore provides the optimal thrust. Engineers who require frequent on-site stroke tuning or trial positioning will benefit from the 30 mm adjustment window. Confirm your requirements for bore, 60 mm maximum stroke, 30 mm window, M5x0.8 port, and female M4x0.7 rod thread.
Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
Turning the external M6x1.0 screw shortens the extend endpoint anywhere from the full 60 mm down to 30 mm. This mechanism acts strictly as a mechanical stop and does not alter force, nor does it lock the piston; a pilot-operated check valve is required for mid-stroke load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.