
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-10B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 60 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X70-10B is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjuster screw that dials the extend stop from 60 to 70 mm directly on your machine. The short riveted body drastically reduces axial mounting depth where a larger profile cylinder will not fit.
This specific SKU includes a male M6x1.0 threaded piston rod end and lacks a piston magnet, meaning it cannot host reed or solid-state switches without upgrading to the -S variant. End-of-travel deceleration is handled strictly by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 70 mm |
| Adjustable range | 60 – 70 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly readjust the mechanical stop on the fly for different package sizes on a packaging line, using the male M6 rod to mount custom deflectors.
Fit the short riveted body into tight test fixtures to deploy sensors, setting the precise extension depth via the M6x1.0 adjuster screw.
Choose this model if your assembly requires on-site stroke tuning within the 60-70 mm window and a male M6x1.0 rod thread.
Remember that a plain pneumatic cylinder does not hold position or load when air is lost or the directional valve is centred; the piston drifts and the fixed bumper only decelerates near the end of stroke, acting as neither a lock nor a brake. For suspended or gravity-loaded applications requiring fail-safe holding, integrate an external rod lock or a pilot-operated check valve. Confirm your bore, 70 mm maximum stroke, 10 mm adjust window, M5x0.8 port, and male rod configuration before finalizing.
Quick checklist
At 0.7 MPa the push increases to 219.9 N. The theoretical maximum push force is 32 kgf at 1.0 MPa.
The external M6x1.0 screw mechanically shortens the extend stroke by up to 10 mm, allowing you to set the stop anywhere between 60 and 70 mm. It does not alter force and is not a mid-stroke lock; the cylinder cannot hold a load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.