
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-30S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 40 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X70-30S is a compact double-acting double-rod cylinder featuring an external extend stop. An M6x1.0 adjuster screw lets you dial the outward stroke anywhere between 40 and 70 mm directly on the machine.
The short riveted body minimizes axial mounting depth where a round-body or profile cylinder will not fit. End-of-travel deceleration relies on a fixed NBR bumper, which is not an adjustable air cushion. This unit includes a built-in piston magnet for AirTAC reed or electronic switches, and the 8 mm rod uses an M4x0.7 female thread.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 70 mm |
| Adjustable range | 40 – 70 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 40-70 mm extend stop during fixture swaps to accommodate varying part heights without machining new spacers.
Sweep the extend length during R&D trials to find the exact 40-70 mm contact point before hard-mounting a fixed stop.
Choose this specific model if your fixture requires frequent on-machine stroke tuning between 40 and 70 mm.
Confirm the 70 mm maximum stroke, 30 mm adjustment window, and M5x0.8 port. The -S code ensures compatibility with AirTAC reed or solid-state switches. Remember that a plain cylinder does not hold its load on air loss or valve centred; the piston drifts and the fixed bumper only decelerates near the end. For a held load, specify an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa.
The M6x1.0 R screw shortens the extend end by up to 30 mm, giving a usable 40-70 mm range without altering force. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.