verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-10SB

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-10SB is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 65 to 75 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke75 mm
  • Adjustable range65–75 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$47.42 $54.92Save 13% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-10SB

The AirTAC SDAJ20X75-10SB is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjustment screw that lets you dial the extend stop from 65 to 75 mm directly on the machine.

This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M6x1.0 piston rod thread. The short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit, while a fixed NBR bumper decelerates the stroke end. The screw is a positioning stop, not a mid-stroke lock.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-10SB Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-10SB
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke75 mm
Adjustable range65 – 75 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-10SB

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×75Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-10SB Is Used

precision_manufacturing

Probe Contact Setup

Dial the extend stop from 65 to 75 mm to set exact probe contact pressure on delicate PCB test fixtures without swapping shims.

view_module

Clamp Positioning

Fine-tune the clamping depth on modular tooling plates using the male M6x1.0 rod end, ensuring precise 8 kg vertical lifts are safely controlled.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-10SB the Right Cylinder?

Choose this specific configuration when your fixture requires on-site extend tuning between 65 and 75 mm. Confirm your setup needs the male M6x1.0 rod thread, the M5x0.8 air port, and the -S magnet for position sensing. Remember that a plain cylinder drifts if air pressure drops; add an external rod lock or pilot-operated check valve if you must hold a load without live pressure.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 65–75 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-10SB FAQ

It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.

The M6x1.0 R screw shortens the extend stroke by up to 10 mm, giving a usable range of 65-75 mm without changing the force. The included -S magnet works with AirTAC reed or electronic solid-state switches mounted in the body grooves for end-position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-10SB

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X75-10SB and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.