verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-50SB

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-50SB is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 25 to 75 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke75 mm
  • Adjustable range25–75 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$47.42 $54.92Save 13% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-50SB

The AirTAC SDAJ20X75-50SB is a compact double-acting cylinder featuring an external extend stop. An M6x1.0 adjuster screw lets you dial the outward stroke anywhere from 25 to 75 mm directly on the machine, eliminating the need for shims or part swaps.

This thin riveted-body design minimizes axial mounting depth where round-body or profile units will not fit. It carries a fixed NBR bumper at each end to decelerate the stroke, though this is not an adjustable air cushion. Equipped with a built-in piston magnet, the unit supports AirTAC reed or electronic switches, while the male M6x1.0 piston rod thread accommodates custom tooling.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-50SB Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-50SB
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke75 mm
Adjustable range25 – 75 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-50SB

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×75Maximum stroke length in mm.
-50Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-50SB Is Used

precision_manufacturing

Trial Positioning Jigs

Dial the extend stop from 25 to 75 mm to find the exact contact point for prototype tooling without machining new spacers.

sync_alt

Rapid Changeover Lines

Turn the M6x1.0 adjuster to accommodate different product widths on a conveyor, saving setup time between batches.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-50SB the Right Cylinder?

It is ideal for operators who require frequent on-site stroke tuning during setup or changeovers.

Confirm the 75 mm maximum stroke, 50 mm adjustment window, and M5x0.8 air port. This specific configuration includes the -S magnet for solid-state sensing and the -B male M6x1.0 rod thread. Remember that a plain cylinder does not hold its load on air loss or valve centring; the piston drifts and the fixed bumper only decelerates near the end. For a held load, specify an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 25–75 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-50SB FAQ

The theoretical maximum is 32 kgf at 1.0 MPa.

The external R screw shortens the extend stroke by up to 50 mm, allowing usable outward travel between 25 and 75 mm. The included -S magnet works with AirTAC reed or electronic switches for position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-50SB

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X75-50SB and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.