
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-20B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 60 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X80-20B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M6x1.0 adjuster screw lets you dial the outward stroke down by up to 20 mm directly on the machine, yielding a usable extend range of 60 to 80 mm without swapping shims or parts.
Built with a short riveted body, this unit saves valuable axial mounting depth where round-body or larger profile cylinders cannot fit. It carries a male M6x1.0 threaded piston rod for direct mounting, runs at speeds from 30 to 500 mm/s, and relies on a fixed NBR bumper at each end to decelerate the stroke. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 80 mm |
| Adjustable range | 60 – 80 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly re-adjust the mechanical stop for different product widths on a packaging line, using the male M6 rod to push diverter gates accurately.
Fit the short riveted body into tight axial spaces to press lightweight bearings, tuning the stroke end precisely to avoid over-travel damage.
Choose this model if your fixture requires on-site stroke tuning between 60 and 80 mm to accommodate part variances.
Confirm your packaging needs a 20 mm bore, an 80 mm maximum stroke with a 20 mm window, an M5x0.8 air port, and the male M6x1.0 rod thread designated by the B option. Remember that a plain cylinder does not hold its load upon air loss or valve centering—the piston will drift, and the fixed NBR bumper only decelerates near the end of travel. If your application demands load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
This 20 mm bore double-acting cylinder pushes at 157.1 N and pulls at 131.9 N when supplied at 0.5 MPa. At 0.7 MPa, push increases to 219.9 N. The theoretical maximum push is 32 kgf at 1.0 MPa. The air port is M5x0.8.
Turning the M6x1.0 R screw shortens the extend stop by up to 20 mm, giving an adjustable outward range of 60 to 80 mm. The screw sets the end position and does not alter force. It is not a mid-stroke lock; the fixed NBR bumper only decelerates the stroke end, so you need an external rod lock for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.