
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-100S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 0 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X85-100S is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjuster screw that dials the extend stop from 0 to 85 mm directly on your machine. Retract travel stays at the full length.
Its short riveted body drastically cuts axial mounting depth where round-body or profile variants will not fit. The unit relies on a fixed NBR bumper at each end to decelerate the stroke end, meaning it is not an adjustable air cushion or a locking brake. Equipped with a built-in piston magnet, this variant supports AirTAC reed or electronic switches for precise position sensing.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-100S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 85 mm |
| Adjustable range | 0 – 85 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 100 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -100 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 85 mm during prototype runs to find the exact 94 N contact position without machining new spacers.
Set a precise upper travel limit for an 8 kg vertical lift, using the M6x1.0 screw to fine-tune the pickup height safely.
Choose this specific model if your fixture requires frequent on-machine stroke tuning without part swaps.
Confirm the 85 mm maximum stroke, 100 mm adjust window, and M5x0.8 port. The -S code denotes the integrated magnet required for sensing, and the rod end accepts a female M4x0.7 thread. Remember that a plain cylinder drifts when air is lost or the valve is centred; the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
This 20 mm bore double-acting cylinder pushes 157.1 N and pulls 131.9 N at 0.5 MPa, and pushes 219.9 N at 0.7 MPa. The theoretical maximum push is 32 kgf at 1.0 MPa. It uses an M5x0.8 air port.
The external M6x1.0 screw shortens the extend stroke by up to 100 mm, allowing you to set the stop anywhere between 0 and 85 mm. The -S code means a built-in magnet is present for direct mounting of AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.