verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-30B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-30B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 55 to 85 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke85 mm
  • Adjustable range55–85 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$44.16 $51.66Save 14% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-30B

The AirTAC SDAJ20X85-30B is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjuster screw that lets you dial the extend stop anywhere between 55 and 85 mm directly on the machine.

This variant features a male M6x1.0 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches without upgrading to the -S option. The short riveted body minimizes axial mounting depth where space is tight, while a fixed NBR bumper decelerates the stroke end without acting as a lock or adjustable air cushion.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-30B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-30B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke85 mm
Adjustable range55 – 85 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-30B

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×85Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-30B Is Used

precision_manufacturing

Tooling Changeover

Dial the 55-85 mm extend stop during fixture swaps to accommodate varying part heights without machining new spacers.

straighten

Trial Positioning

Use the M6x1.0 male rod end to probe assembly depths, locking the exact extend point once a 94 N safe load is verified.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-30B the Right Cylinder?

Choose this specific model if your fixture requires on-site stroke tuning during changeovers, and confirm your bore, 85 mm maximum stroke, 30 mm window, M5x0.8 port, male M6 rod thread, and absence of a magnet.

Remember that a plain SDAJ does not hold position if air pressure drops or the valve centers; the piston will drift, and the fixed bumper only decelerates near the end of travel. For load holding without live pressure, install an external rod lock or a pilot-operated check valve. Operating speed spans 30-500 mm/s across a 0.15 to 1.0 MPa pressure range.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 55–85 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-30B FAQ

The theoretical maximum push is 32 kgf at 1.0 MPa.

Turning the external R (M6x1.0) screw shortens the extend stroke by up to 30 mm, giving a usable range of 55 to 85 mm. It is a mechanical stop, not a mid-stroke lock; the cylinder cannot hold a load on air loss and requires an external rod lock for holding.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-30B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X85-30B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.