
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X90-10 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 80 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X90-10 is a compact double-acting double-rod cylinder featuring an external extend stop. An M6x1.0 adjuster screw lets you dial the forward stroke down from the 90mm maximum to 80mm directly on the machine, eliminating the need for shims or part swaps.
Built with a short riveted body, this unit saves axial mounting depth where round-body or profile cylinders will not fit. It uses an 8mm piston rod and an M5x0.8 port. End shock is managed by a fixed NBR bumper, which decelerates the piston near the stroke limits but is not an adjustable air cushion. This specific SKU lacks a piston magnet, so it cannot accommodate reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X90-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 90 mm |
| Adjustable range | 80 – 90 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 80 to 90mm extend position during initial fixture commissioning to prevent crashing delicate tooling into the workpiece.
Adjust the mechanical stop on the fly to accommodate varying package widths on a packaging line without changing cylinder hardware.
Fine-tune the upward extend stop to test the lift height of an 8kg component before locking the M6x1.0 screw for production runs.
Choose this model if your fixture requires precise on-site stroke tuning between 80 and 90mm.
Confirm your requirements for the 90mm maximum stroke, 10mm adjustment window, and M5x0.8 port. Note that a plain cylinder does not hold its load on air loss or when the valve is centered; the piston drifts and the fixed bumper only decelerates near the end. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. This SKU has no magnet; select the -S variant if you need sensing capabilities.
Quick checklist
The theoretical maximum push is 32kgf at 1.0MPa. It operates between 0.15 and 1.0MPa, with a proof pressure of 1.5MPa, and runs at speeds of 30-500mm/s.
The M6x1.0 adjuster screw acts as a mechanical stop that shortens the forward stroke from the 90mm maximum down to 80mm. It does not alter the force output and is not a mid-stroke lock. This SKU lacks a piston magnet, so it cannot use reed or electronic switches; you would need the -S option for sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.