verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X90-100

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X90-100 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 0 to 90 mm on the machine — no shims, no part change.

  • BoreØ20 mm
  • Max stroke90 mm
  • Adjustable range0–90 mm
  • Adjuster threadM6×1.0
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$46.02 $53.52Save 14% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ20 stroke, mounting and version on one page All SDAJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X90-100

The AirTAC SDAJ20X90-100 is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjustment screw that lets you dial the extend stop from 0 to 90 mm directly on the machine. The short riveted body drastically reduces axial mounting depth, fitting easily into tight assemblies where longer profile or round-body units cannot.

This unit relies on a fixed NBR bumper at each end to decelerate the stroke, meaning it is not an adjustable air cushion or a mid-stroke lock. Operating speeds span 30-500 mm/s, and the 8 mm piston rod uses an M4x0.7 female thread. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to an -S variant.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X90-100 Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X90-100
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ20 mm
Max stroke90 mm
Adjustable range0 – 90 mm
Adjuster thread (R)M6×1.0
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM4×0.7 F / M6×1.0 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 100 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø20mm)

PressurePush forcePull force
0.5 MPa132 N132 N
0.7 MPa185 N—
Max (@1.0 MPa)27 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X90-100

SDAJCompact double-acting cylinder with adjustable stroke.
20Bore size in mm.
×90Maximum stroke length in mm.
-100Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X90-100 Is Used

precision_manufacturing

Trial Positioning Jigs

Dial in the exact extend stop from 0 to 90 mm during prototype runs, finding the perfect contact point without machining new spacers.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X90-100 the Right Cylinder?

Choose this 0-90 mm adjustable model if your fixture requires frequent changeovers or trial positioning.

Remember that a plain SDAJ does not hold a load if air pressure drops or the valve is centered; the piston will drift and the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. Confirm your required extend window, the M5x0.8 port, and that you do not need the -S magnet for sensing before finalizing.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 0–90 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M6×1.0 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X90-100 FAQ

The theoretical maximum push is 32 kgf at 1.0 MPa.

Turning the external M6x1.0 R screw shortens the extend stroke by up to 100 mm, allowing you to set the stop anywhere between 0 and 90 mm. This mechanism only sets the end position and does not alter the output force.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X90-100

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ20X90-100 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.