
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X90-20 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 70 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X90-20 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M6x1.0 adjuster screw lets you dial the forward end-position anywhere between 70 and 90 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
Built with a short riveted body, this unit saves axial mounting depth where a larger profile cylinder will not fit. It uses an 8 mm piston rod and an M5x0.8 air port. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic sensing without upgrading to the -S variant.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X90-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 90 mm |
| Adjustable range | 70 – 90 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 70 to 90 mm via the M6 screw to set exact forming depth on multi-product lines without machining new spacers.
Fit the short riveted body into tight machinery footprints and adjust the mechanical stop to trial different sensor testing distances.
When sizing this 20 mm bore actuator, evaluate your force needs against its neighbors. Choose this model if your assembly requires on-site stroke tuning to hit a precise target without swapping physical parts.
Remember that a plain pneumatic cylinder does not hold its load if air pressure drops or the valve is centered; the piston will drift. The fixed NBR bumper only decelerates the stroke near its end and is never a lock. For suspended or gravity-loaded applications, install an external rod lock or a pilot-operated check valve. Confirm your bore, 90 mm maximum stroke, 20 mm adjust window, M5x0.8 port, and female M4x0.7 rod-end thread before ordering.
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa.
Turning the external R (M6x1.0) screw shortens the extend stroke by up to 20 mm, giving a usable forward range of 70 to 90 mm; retract remains full. This SKU has no piston magnet and cannot take a switch, but the -S variant adds a magnet compatible with AirTAC reed or electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.