
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X90-30S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 60 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X90-30S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M6x1.0 adjuster screw lets you dial the forward end-position anywhere between 60 and 90 mm directly on your equipment, eliminating the need for shims or part swaps.
Its short riveted body drastically reduces axial mounting depth, fitting where round-body or profile cylinders cannot. The unit relies on a fixed NBR bumper to decelerate at the stroke end, which is not an adjustable air cushion. Equipped with a built-in piston magnet, this variant supports AirTAC reed or electronic switches for precise position sensing.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X90-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 90 mm |
| Adjustable range | 60 – 90 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly adjust the mechanical stop for different product lengths without changing cylinder hardware, leveraging the 8 kg vertical lift capacity.
Fit the short riveted body into tight assembly cells to push parts at 157.1 N, using the built-in magnet to confirm retraction.
Choose this model if your fixture requires frequent on-machine stroke tuning during setup or changeovers.
Confirm your parameters: 20 mm bore, 90 mm maximum stroke with a 30 mm adjustment window, M5x0.8 port, and a female M4x0.7 rod-end thread. The included -S magnet enables switch sensing. Remember that a plain cylinder does not hold position or load when air is lost or the valve is centered; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa.
The M6x1.0 screw shortens the extend stroke by up to 30 mm, giving a usable range of 60 to 90 mm without altering force. The built-in magnet works with AirTAC reed or electronic switches for position feedback.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.