
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X90-50S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 40 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X90-50S is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjustment screw. Turning this R screw lets you dial the extend end-position anywhere between 40 and 90 mm directly on your equipment, eliminating the need for shims or part swaps during changeovers. Retract remains at the full 90 mm.
The short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. This unit includes a built-in piston magnet for AirTAC reed or electronic switches, and relies on a fixed NBR bumper to absorb end-of-stroke shock.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X90-50S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 90 mm |
| Adjustable range | 40 – 90 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the extend stop from 40 to 90 mm via the M6x1.0 screw during prototype runs, finding the exact 94 N safe working contact point without machining new spacers.
When sizing this 20 mm bore actuator, evaluate your force requirements bidirectionally.
Choose this specific model if your fixture requires frequent on-site stroke tuning across a 50 mm window. Verify your setup needs an M5x0.8 air port, a female M4x0.7 rod-end thread, and the included -S magnet for positioning feedback. Remember that a standard compact cylinder does not hold position upon air loss; the fixed bumper only decelerates the stroke end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
The external R (M6x1.0) screw mechanically shortens the extend stroke by up to 50 mm, allowing a usable range of 40-90 mm. It does not alter the pneumatic force. The cylinder does not hold load on air loss; you must add an external rod lock or pilot-operated check valve for holding. The built-in -S magnet works with AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.