
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-40S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 60 to 100 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X100-40S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M8x1.25 adjuster screw lets you dial the forward end-position anywhere between 60 and 100 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Retract remains at the full 100 mm.
The short riveted body saves valuable axial mounting depth where round-body or larger profile cylinders will not fit. This unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches along the body grooves. End-of-travel deceleration is handled by a fixed NBR bumper at each end, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 100 mm |
| Adjustable range | 60 – 100 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×100 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 60 to 100 mm via the M8 screw to accommodate different part heights on a machining line without swapping cylinders or adding shims.
Use the 40 mm adjustable window during initial fixture commissioning to find the exact 12.5 kg vertical lift point before locking down the mechanical stop.
Choose this specific model if your fixture setup requires frequent trial positioning or on-site stroke tuning across its 40 mm window.
Confirm the bore (25 mm), maximum stroke (100 mm), adjustment window (40 mm), and M5x0.8 air port match your pneumatic layout. This variant includes the magnet option (S) for sensing and uses a female M5x0.8 rod-end thread on its 10 mm rod. Remember that a plain compact cylinder does not hold a load if air pressure drops or the valve is centred; the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, specify an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.7 MPa, push is 343.6 N and pull is 288.6 N. The theoretical maximum push is 50 kgf at 1.0 MPa. Adjusting the stroke does not alter these force values.
The M8x1.25 R screw shortens the extend stroke by up to 40 mm, giving a usable forward range of 60 to 100 mm. The included -S magnet allows you to mount AirTAC reed or electronic solid-state switches directly in the body grooves for end-of-stroke signaling.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.