
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-50 is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 50 to 100 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X100-50 is a double-acting compact cylinder featuring an external M8x1.25 adjuster screw that lets you dial the extend stop anywhere between 50 and 100 mm directly at the machine.
Its short riveted body drastically cuts axial mounting depth where round-body alternatives will not fit. End-of-stroke deceleration relies on a fixed NBR bumper rather than an adjustable air cushion, meaning high-energy cycles may require slowing the approach or adding external shock absorption.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-50 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 100 mm |
| Adjustable range | 50 – 100 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×100 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 50 to 100 mm extend position during rapid product changeovers, avoiding the downtime of physically swapping shims or cylinders on the line.
Experiment with multiple extend endpoints during R&D testing, relying on the fixed NBR bumper to absorb the impact of each trial stop.
Operators who frequently change tooling or require trial positioning benefit most from this 50 mm adjustment window. Note that a plain cylinder drifts when air is lost or the valve centres; the bumper only decelerates near the end and the adjuster is a mechanical stop, not a lock. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve. Confirm your bore, 100 mm maximum stroke, 50 mm window, M5x0.8 port, female rod thread, and lack of a magnet for this specific SKU.
Quick checklist
Turning the M8x1.25 R screw shortens the extend endpoint from the 100 mm maximum down to 50 mm. This sets a mechanical stop and does not change the output force, nor does it lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.