verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-75B

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-75B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 25 to 100 mm on the machine — no shims, no part change.

  • BoreØ25 mm
  • Max stroke100 mm
  • Adjustable range25–100 mm
  • Adjuster threadM8×1.25
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$51.61 $59.11Save 12% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ25 stroke, mounting and version on one page All SDAJ25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-75B

The AirTAC SDAJ25X100-75B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M8x1.25) screw, you can dial the outward stroke down by up to 75 mm directly on your machine, yielding a usable extend range of 25 to 100 mm without swapping shims or parts.

This variant features a male M8x1.25 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches unless upgraded to an -S code. The short riveted body conserves axial mounting depth where round-body or profile cylinders will not fit. End shock is managed solely by a fixed NBR bumper that decelerates the stroke end; it is not an adjustable air cushion, nor does it function as a mid-stroke lock or brake.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-75B Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-75B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ25 mm
Max stroke100 mm
Adjustable range25 – 100 mm
Adjuster thread (R)M8×1.25
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM5×0.8 F / M8×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa206 N206 N
0.7 MPa289 N—
Max (@1.0 MPa)42 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-75B

SDAJCompact double-acting cylinder with adjustable stroke.
25Bore size in mm.
×100Maximum stroke length in mm.
-75Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-75B Is Used

precision_manufacturing

Adjustable Tooling Stops

Dial the extend stop from 25 to 100 mm during machine changeover to accommodate different part lengths without fabricating new hard stops.

science

Prototype Positioning

Find the exact extension point for trial assemblies by turning the R screw, then lock it down once the ideal 25-100 mm stroke is achieved.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-75B the Right Cylinder?

Choose this specific model if your fixture requires frequent on-site stroke tuning across a wide 25 to 100 mm window.

Confirm your parameters: 25 mm bore, 100 mm maximum stroke, 75 mm adjust window, M5x0.8 air port, male M8x1.25 rod thread, and no magnet. Remember that a plain cylinder does not hold its load on air loss or when the valve is centred—the piston drifts. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 25–100 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M8×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-75B FAQ

At 0.7 MPa, push is 343.6 N and pull is 288.6 N. The theoretical maximum push is 50 kgf at 1.0 MPa.

Turning the external M8x1.25 R screw shortens the extend stroke by up to 75 mm, allowing any outward position between 25 and 100 mm. This specific SKU has no magnet and cannot take a switch; adding the -S option enables reed or electronic sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-75B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ25X100-75B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.