verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-75SB

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-75SB is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 25 to 100 mm on the machine — no shims, no part change.

  • BoreØ25 mm
  • Max stroke100 mm
  • Adjustable range25–100 mm
  • Adjuster threadM8×1.25
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$59.98 $67.48Save 11% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ25 stroke, mounting and version on one page All SDAJ25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-75SB

The AirTAC SDAJ25X100-75SB is a double-acting, double-rod compact cylinder featuring an external adjustable extend stop. By turning the R (M8x1.25) screw, you can dial the forward stroke down from the 100 mm maximum to as little as 25 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. The short riveted body saves axial mounting depth where a round-body or profile cylinder will not fit.

This specific build includes a male M8x1.25 piston rod end and a built-in piston magnet for AirTAC reed or electronic switches. End-of-travel deceleration is handled by a fixed NBR bumper, not an adjustable air cushion.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-75SB Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-75SB
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ25 mm
Max stroke100 mm
Adjustable range25 – 100 mm
Adjuster thread (R)M8×1.25
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM5×0.8 F / M8×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa206 N206 N
0.7 MPa289 N—
Max (@1.0 MPa)42 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-75SB

SDAJCompact double-acting cylinder with adjustable stroke.
25Bore size in mm.
×100Maximum stroke length in mm.
-75Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-75SB Is Used

sync_alt

Rapid Format Changeover

Rotate the external stop to shift the extend endpoint for different product lengths on a packaging line, avoiding teardown or shim adjustments during shift transitions.

view_module

Variable Depth Indexing

Probe or insert components to a precise programmed depth by tuning the mechanical stop, relying on the fixed NBR bumper to absorb the end shock.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-75SB the Right Cylinder?

Choose this model if your fixture requires frequent on-site stroke tuning between 25 and 100 mm.

Confirm the required bore, 100 mm maximum stroke, 75 mm adjust window, and M5x0.8 air port. This configuration includes the -S magnet for sensing and the -B male M8x1.25 rod thread. Remember that a plain cylinder does not hold its load on air loss or when the valve is centred; the piston drifts and the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 25–100 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M8×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-75SB FAQ

The adjuster changes the stop position, not the force.

The R (M8x1.25) screw shortens the extend stroke by up to 75 mm, giving a usable forward range of 25 to 100 mm; retract remains full. The included -S magnet works with AirTAC reed or electronic switches for end-of-stroke sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X100-75SB

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ25X100-75SB and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.