
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X120-40 is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 80 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X120-40 is a double-acting compact cylinder featuring an external adjustable extend stop. An M8x1.25 adjuster screw lets you dial the outward stroke anywhere between 80 and 120 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Retract remains full length, and the mechanical stop sets position without altering pneumatic force.
The short riveted body minimizes axial mounting depth where space is tight. End-of-travel deceleration relies on a fixed NBR bumper, which is not an adjustable air cushion. Note this SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S option.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X120-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 120 mm |
| Adjustable range | 80 – 120 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 80 to 120 mm during prototype runs to find the exact 245.4 N contact point without machining new spacers.
Re-adjust the mechanical stop on-site when switching product widths, using the full 120 mm retract to clear the belt before the next cycle.
Fine-tune the pack depth within the 40 mm window while relying on the fixed NBR bumper to absorb the end shock at operating speeds up to 500 mm/s.
When sizing this 25 mm bore actuator, verify your force needs against its neighbors.
Select this specific model if your fixture requires on-site stroke tuning across an 80 to 120 mm window. Confirm your porting matches the bore-fixed M5x0.8 thread and that you have the female M5x0.8 rod end. Remember that a plain cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end and does not lock the load. For secure holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
Turning the M8x1.25 R screw shortens the extend stroke on-site between 80 and 120 mm. The screw acts only as a mechanical stop and does not alter force. It cannot hold a load if air pressure drops; use an external rod lock for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.