
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X120-75B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 45 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X120-75B is a compact double-acting double-rod cylinder featuring an external extend stop. An M8x1.25 adjuster screw lets you dial the outward stroke down by 75 mm, yielding a usable 45 to 120 mm end position directly on the machine.
Its short riveted body drastically reduces axial mounting depth where a larger profile cylinder will not fit. The bore is hard-anodized and uses a fixed NBR bumper at each end to decelerate the stroke, which is not an adjustable air cushion. This specific SKU includes a male M8x1.25 piston rod and lacks a piston magnet, meaning it cannot accept reed or electronic switches without changing to an -S variant.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X120-75B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 120 mm |
| Adjustable range | 45 – 120 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 45 and 120 mm during trial positioning of gauges, eliminating the need to machine custom spacers for every new part dimension.
Fit the compact riveted body into tight machine cells where axial length is restricted, setting precise mechanical stops for light metal forming tasks.
When sizing this 25 mm bore, evaluate both neighbours. Choose the 25 mm if you need that exact force band and an adjustable outward stop for frequent format changeovers.
Confirm your parameters: 25 mm bore, 120 mm maximum stroke, 75 mm adjust window, M5x0.8 port, and a male M8x1.25 rod thread. Note that a plain cylinder drifts when air is lost or a valve is centred; the fixed bumper only decelerates near the end and the adjuster is a mechanical stop, not a lock. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa.
The M8x1.25 R screw mechanically shortens the extend end position by up to 75 mm, allowing you to set the outward stroke anywhere from 45 to 120 mm. The retract remains full stroke, and the screw does not alter the force or lock the piston mid-travel.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.