
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X20-10S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 20 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X20-10S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the R (M8x1.25) screw lets you dial the extend position down from the 20mm maximum to 10mm directly on the machine, eliminating shims or part swaps during changeovers.
Its short riveted body drastically cuts axial mounting depth where larger profile cylinders cannot fit. The unit relies on a fixed NBR bumper to decelerate at the stroke ends rather than an adjustable air cushion. Because the -S code is present, a built-in piston magnet enables position sensing with AirTAC reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X20-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 20 mm |
| Adjustable range | 10 – 20 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×20 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact extend stop between 10 and 20mm during initial tooling calibration without machining custom spacers.
Adjust the mechanical stop on-site for different part heights, cutting shift changeover time on packaging lines.
Fine-tune the extend endpoint in 10-20mm test rigs to find the optimal contact point before finalizing a design.
Choose the 25mm if the 20mm lacks force or the 32mm is too bulky.
The on-site adjustability is ideal for trial positioning and setup-heavy lines. Remember that a plain cylinder does not hold a load on air loss or when the valve is centred; the bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve. This configuration includes the -S magnet and a female M5x0.8 rod-end thread, with an M5x0.8 port.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The R (M8x1.25) screw mechanically shortens the extend stop from 20mm down to 10mm without altering force. The included -S magnet works with AirTAC reed or electronic switches for end-position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.