
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X25-20 is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 5 to 25 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X25-20 is a compact double-acting double-rod cylinder featuring an external M8x1.25 adjustment screw that dials the extend stop anywhere from 5 to 25 mm.
Its short riveted body drastically cuts axial mounting depth where round-body or profile variants will not fit. End-of-stroke energy is managed by a fixed NBR bumper that decelerates the piston without acting as a lock, and this specific SKU lacks a piston magnet, meaning it cannot host reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X25-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 25 mm |
| Adjustable range | 5 – 25 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×25 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 5 to 25 mm during product family swaps to align grippers without fabricating new mechanical shims.
Iterate on probe contact depth safely, relying on the fixed NBR bumper to absorb end-of-stroke shock during repetitive impact testing.
Choose this model if your fixture requires on-site stroke tuning to hit exact targets without machining new spacers.
Verify your parameters before ordering: 25 mm bore, 25 mm maximum stroke, 20 mm adjustment window, and an M5x0.8 port. The female M5x0.8 rod-end thread suits standard clevis attachments. Remember that a plain SDAJ does not hold position on air loss or valve centering; the fixed NBR bumper only decelerates near the end of travel. For suspended loads, specify an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa.
Turning the external M8x1.25 screw shortens the extend stroke by up to 20 mm, yielding a usable extend range of 5 to 25 mm. The retract stroke remains full. This SKU has no piston magnet, so it cannot accept position switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.