
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X30-20S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X30-20S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the R (M8x1.25) screw lets you dial the forward end-position on the machine, shortening the stroke by up to 20 mm for a usable extend range of 10 to 30 mm without swapping shims or parts. Retract remains full length.
The short riveted body minimizes axial mounting depth where a larger profile cylinder will not fit. A fixed NBR bumper decelerates the stroke end, and the built-in magnet (-S) supports AirTAC reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X30-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 30 mm |
| Adjustable range | 10 – 30 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 10 and 30 mm to find the exact contact point during prototype tooling setup, avoiding part changes.
Turn the M8x1.25 adjuster screw to tune the extend endpoint for new product runs, saving axial depth in tight machine cells.
Choose this exact unit if your fixture requires on-site stroke tuning between 10 and 30 mm.
Confirm your required bore, 30 mm maximum stroke, 20 mm window, and M5x0.8 port. The -S code indicates the piston magnet is present for sensing. Note that a plain cylinder does not hold position on air loss or valve centering; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
At 0.7 MPa, push is 343.6 N and pull is 288.6 N. The theoretical maximum push is 50 kgf at 1.0 MPa.
The R (M8x1.25) screw shortens the extend stroke by up to 20 mm, yielding a 10 to 30 mm operating range. The -S code means a built-in magnet is included for AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.