
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X30-30B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X30-30B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M8x1.25 adjuster screw lets you dial the extend position from 0 to 30 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Retract remains a full 30 mm stroke. The short riveted body saves valuable axial mounting depth where standard round-body or profile cylinders cannot fit.
The piston rod is 10 mm thick with a male M8x1.25 thread end. End-of-stroke deceleration is handled by a fixed NBR bumper, not an adjustable air cushion. Note this SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X30-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 30 mm |
| Adjustable range | 0 – 30 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 0-30 mm extend stop during prototype runs. The M8x1.25 screw lets operators find the perfect contact point without machining new spacers.
Swap product variants rapidly by turning the external adjuster.
Fit ejection mechanisms into tight machine footprints. The compact riveted body minimizes axial length while the male M8x1.25 rod secures the tooling.
Choose this model if your fixture requires on-site stroke tuning between 0 and 30 mm.
Confirm the bore, 30 mm maximum stroke, 30 mm adjust window, and M5x0.8 air port suit your pneumatic layout. This SKU includes the -B option for a male M8x1.25 piston rod, but has no -S magnet for sensing. A plain cylinder does not hold a load when air is lost or the valve is centred; the fixed NBR bumper only decelerates near the end of travel. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa. Adjusting the stroke does not alter these force values.
The R (M8x1.25) screw mechanically shortens the extend end-position by up to 30 mm, giving a usable extend range of 0 to 30 mm. It sets the hard stop and does not function as a mid-stroke lock. This specific SKU lacks a piston magnet, so magnetic switches cannot be used.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.