verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X50-30

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X50-30 is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 20 to 50 mm on the machine — no shims, no part change.

  • BoreØ25 mm
  • Max stroke50 mm
  • Adjustable range20–50 mm
  • Adjuster threadM8×1.25
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$36.25 $43.75Save 17% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ25 stroke, mounting and version on one page All SDAJ25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X50-30

The AirTAC SDAJ25X50-30 is a compact double-acting double-rod cylinder featuring an external extend stop. An M8x1.25 adjuster screw lets you dial the outward stroke anywhere between 20 and 50 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Retract remains full length, and the mechanical stop does not alter the internal piston area.

The short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. End shock is handled by a fixed NBR bumper, which decelerates the piston near the end of travel but is not an adjustable air cushion.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X50-30 Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X50-30
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ25 mm
Max stroke50 mm
Adjustable range20 – 50 mm
Adjuster thread (R)M8×1.25
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM5×0.8 F / M8×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa206 N206 N
0.7 MPa289 N—
Max (@1.0 MPa)42 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X50-30

SDAJCompact double-acting cylinder with adjustable stroke.
25Bore size in mm.
×50Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X50-30 Is Used

sync_alt

Changeover Dialing

Perfect for packaging lines running multiple carton sizes; turn the M8x1.25 screw to shift the extend stop between 20 and 50 mm without changing hardware.

view_module

Compact Ejector

Fits into tight machine cells where axial depth is restricted, using the fixed NBR bumper to absorb the shock of kicking parts out at up to 500 mm/s.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X50-30 the Right Cylinder?

Stepping down to the SDAJ20 yields 157.1 N, while moving up to the SDAJ32 provides 402.1 N. Choose this specific unit if your fixture setup requires frequent trial positioning or on-site stroke tuning within that 20 to 50 mm window.

Confirm the 50 mm maximum stroke, 30 mm adjustment window, and M5x0.8 port before ordering. This SKU lacks the -S magnet, so it cannot accept reed or electronic switches; select the -S variant if you need position sensing. Note that a plain cylinder does not hold a load when air is lost or the valve is centred—the fixed bumper only decelerates the stroke end. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve. This unit features a female M5x0.8 rod-end thread.

AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 20–50 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M8×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X50-30 FAQ

At 0.7 MPa, push increases to 343.6 N. The theoretical maximum push is 50 kgf at 1.0 MPa.

Turning the external R (M8x1.25) screw mechanically shortens the extend stop, giving a usable outward range of 20 to 50 mm. It is only a stop, not a mid-stroke lock, and the cylinder will drift if air pressure is lost.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X50-30

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ25X50-30 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.