
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X55-20 is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 35 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X55-20 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M8x1.25) screw, you shorten the forward stroke on-site across a 35 to 55 mm window, eliminating the need for shims or part swaps during machine commissioning. The retract motion remains full length.
The short riveted body saves axial mounting depth where larger profile cylinders will not fit. End shock is managed solely by a fixed NBR bumper, meaning this unit does not feature adjustable air cushioning.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X55-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 55 mm |
| Adjustable range | 35 – 55 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the mechanical stop on carton folding arms during format changes, relying on the fixed NBR bumper to absorb the end shock at operating speeds.
Set precise trial push positions for aligning light 12.5 kg assemblies on a fixture, adjusting the M8x1.25 screw on the machine instead of swapping cylinders.
When sizing this 25 mm bore actuator, evaluate your force requirements both ways.
Operators needing precise on-site stroke tuning between 35 and 55 mm will benefit from the external R thread adjustment. Note that a plain SDAJ does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, install an external rod lock or pilot-operated check valve. This specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; confirm your bore, stroke, window, M5x0.8 port, and female rod-end thread requirements before ordering.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
Turning the external R (M8x1.25) screw shortens the forward end position by up to 20 mm, providing a usable extend range of 35 to 55 mm. It acts strictly as a mechanical stop and does not alter the output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.