
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X55-50S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 5 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X55-50S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M8x1.25 adjuster screw lets you dial the forward endpoint down from the 55mm maximum to as low as 5mm directly at the machine, eliminating the need for shims or part swaps during changeovers.
Built with a short riveted body, this unit saves axial mounting depth where a round-body cylinder will not fit. It relies on a fixed NBR bumper at each end to decelerate the stroke, which is not an adjustable air cushion. The included -S piston magnet supports position sensing using AirTAC reed or electronic switches fitted into the body grooves.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X55-50S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 55 mm |
| Adjustable range | 5 – 55 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the M8x1.25 screw to shift the extend stop between 5 and 55mm for varying part lengths without machining new spacers.
Use the 50mm adjustment window to find the exact 12.5kg vertical lift endpoint before locking the mechanical stop for production.
Choose this specific configuration when your fixture requires frequent on-site stroke tuning across a wide 5 to 55mm window. It includes the -S magnet for electronic or reed sensors and a female M5x0.8 rod-end thread on a 10mm rod. Remember that a plain cylinder does not hold its load on air loss or when the valve is centred; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
This 25mm bore cylinder has an M5x0.8 port.
Turning the external R (M8x1.25) screw shortens the extend stroke by up to 50mm, giving a usable forward range of 5 to 55mm. The -S suffix denotes a built-in piston magnet for AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.