
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X65-50 is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 15 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X65-50 is a compact double-acting double-rod cylinder featuring an external M8x1.25 adjustment screw that dials the extend stop directly on your machine between 15 and 65 mm. Retract travel stays full length regardless of the extend setting.
Its short riveted body drastically cuts axial mounting depth where a larger profile cylinder will not fit. End-of-stroke shock is handled by a fixed NBR bumper that decelerates the piston, which is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet and cannot accept sensing switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X65-50 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 65 mm |
| Adjustable range | 15 – 65 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 15 to 65 mm on a test rig to find the exact probe contact depth without machining new spacers.
Turn the M8x1.25 screw to shift the pusher endpoint between product families, saving minutes during packaging line changeovers.
Set a temporary mechanical stop for a 12.5 kg vertical lift fixture, fine-tuning the endpoint during initial commissioning before locking it down.
Choose the 65 mm base stroke with the 50 mm window for fixtures requiring frequent trial positioning or rapid changeover.
Confirm the 25 mm bore, 65 mm stroke, 50 mm adjust window, and M5x0.8 port. This base configuration ships without a magnet (no -S) and uses a female M5x0.8 rod-end thread. A plain cylinder does not hold a load if air pressure drops or the valve centers; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa.
The external R (M8x1.25) screw mechanically shortens the extend stroke by up to 50 mm, giving a usable range of 15 to 65 mm without shims. This specific SKU has no piston magnet, so it cannot take a switch; you would need the -S variant for reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.