
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X70-40B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 30 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X70-40B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M8x1.25) screw, you can dial the forward stroke down by up to 40 mm directly on the machine, yielding a usable extend range of 30 to 70 mm without swapping shims or parts.
This variant features a male M8x1.25 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches. The short riveted body saves valuable axial mounting depth where round-body or profile cylinders will not fit. End-of-stroke deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X70-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 70 mm |
| Adjustable range | 30 – 70 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Ideal for packaging lines running multiple carton sizes; operators twist the M8x1.25 screw to shift the extend stop from 70 mm down to 30 mm in seconds without changing hardware.
Perfect for dialling in a 12.5 kg vertical lift during prototype tooling, letting engineers fine-tune the exact extend endpoint against a workpiece before locking the collar.
Choose this specific model if your fixture requires frequent on-site stroke tuning between 30 and 70 mm during changeovers.
Verify your setup needs a male M8x1.25 rod end, an M5x0.8 air port, and a 40 mm adjustment window. Because this SKU lacks the -S magnet, position sensing is impossible without changing the cylinder. Crucially, the fixed NBR bumper only decelerates the stroke end; a plain cylinder does not hold its load on air loss or valve centring, so deploy an external rod lock or pilot-operated check valve for suspended loads.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 343.6 N. The theoretical maximum push is 50 kgf at 1.0 MPa. Operating pressure spans 0.15 to 1.0 MPa, with a speed range of 30-500 mm/s.
The external R (M8x1.25) screw acts as a mechanical stop that shortens the forward stroke from its 70 mm maximum down to 30 mm. The fixed NBR bumper only decelerates the stroke end; the cylinder cannot hold a load if air is lost, so use an external rod lock for suspended loads.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.